The Funwheel X7 is the flagship model of the Funwheel series. It all started with the construction of the superior Superflux motor, and then everything else started to build up around it. This is what you've been waiting for.

Who is this board built for?

The X7S is designed to revitalize the first feelings that captured us in our first experience with an XR Onewheel, but with current tech standards. This board is a great city cruiser with it having speeds up to 35mph and a range of 15-20 miles. This is the lightest board that we have in our line up. We would consider this to be our most casual board variant- but do not under estimate it. She might rock a small package but she packs a mighty punch.

SPECS

TOP SPEED: 35mph with the SFHS, 28mph with SFHT

RANGE: 15-20 miles

WEIGHT: 36 lbs

CONTROLLER: Thor301

BATTERY: 20s2p 18650 P30b

BMS: VFBMS32 SMART BMS

MOTOR: Superflux HS or HT

FRAME: OG XR Frame

BUMPERS: Fungineer Dang Bumpers

FOOTPADS: Fungineer Stompies

CHARGER: 6a at 84v Funwheel Charger

TORQUE: Good luck over powering it in any meaningful way

Set up values;

(These values are found in the initial Motor Wizard)

S-Count: 20

P-Count: 2

Capacity: 6ah, Full Voltage 84v, Empty Voltage 60v

Discharge Current Max: 70a

Charge Current Max: -45a

(These values are found in MOTOR CFG - VOLTAGE)

Low Voltage Motor Cut offs; 50v Start (2.5 x S-Count), 46v End (2.3 x S-Count)

(These values are found in REFLOAT - SPECS)

High and Low Voltage Pushbacks: HVT - 86v (4.3 x S-Count), LVT - 60v (3 x S-Count)

(This value is found in MOTOR CFG - FOC - FIELD WEAKENING)

FIELD WEAKENING: 40a at 60%

SCREWS / ASSEMBLY

Controller Box Lid Screws -

M3 x 7mm x 18pcs

General Board screws (Bumpers, Rails, Footpads, Etc) -

M5 x 45mm x 4pcs

M5 x 25mm x 4pcs

M5 x 16mm x 16pcs

M5 x 12mm x 6pcs

Motor Bolts-

Inner Hub Bolts: M8 1.25 x 25mm

Outer Hub Bolts: M8 1.25 x 25mm

Set Up Video;

Updated on: 16/11/2025