HOW TO ASSEMBLE & DISASSEMBLE AN X7

Hey there builder! This document should provide you all the information you need to take apart or put together an X7. Be sure to check out the video guide, the PDF guide, and all the documentation on the specifics of each X7 board type before you start unscrewing stuff!

X7 Build Guide PDF

Tips about the X7 design;

• The X7 is build around the original XR form factor. (Not related to the XRC) Most accessories for this discontinued board type is compatible, check out our documentation on that here.
• The X7 and all it's parts are fastened together with METRIC screws, meanwhile a lot of XR accessories are IMPERIAL- DO NOT MIX THESE SCREWS. Metric and Imperial screws look the same and might initially thread, but they're just different enough that they'll destroy each others threads. Make sure you use the right screws in the right places.
• The X7 has a lot of different screw types; M3, M5, and M8 bolts, and a bunch of different lengths. When assembling an X7, be mindful of the lengths of your screws and the places they go into. Too long of a screw can puncture a lid or cut a harness, too short of one won't hold the pieces together. Check out this 3D Screw Holder print, it'll help you keep track of your screws.
• Our production of boards just recently switched from HEX screws to TORX screws- be prepared for both screw types as you work on your board.

Updated on: 03/10/2026